Make Any Laptop Touch Screen
Have you ever thought about your normal non touch screen. It can be converted into a touchscreen with all touch screen facilities . . It can be true by a Neonode AIRBAR. It is compatible with Mac and Windows 10.
It is available in three different sizes
13.3, 14, 15.6 and looks very stylish. it weighs only 55gm so it is easy to carry with your bagpack.
Price of this device is about Rs. 4999 - 6299 ( price may vary)
Size:
when you touch the display, infrared light cut by your finger at that point of the screen and a feedback sent to the airbar device to the laptop.
It is available in three different sizes
13.3, 14, 15.6 and looks very stylish. it weighs only 55gm so it is easy to carry with your bagpack.
Price of this device is about Rs. 4999 - 6299 ( price may vary)
Size:
Process of Installation
- First peal off the round shape sticker form the magnets on the back of Airbar.
- place the airbar device in the bottom of the screen , 3mm below the bottom of the display.
- There are small mark on the airbar on each side, Match them with corner of your display. press a little harder on the magnet points for 10 - 15 seconds, then remove airbar.
- Put it back on magnet and plug the USB in port. Device is ready for use.
How It Works
It work on the principal of light interpolation, it means infrared lights projects on screen.when you touch the display, infrared light cut by your finger at that point of the screen and a feedback sent to the airbar device to the laptop.
No comments